Publications Internationales
|
2024 |
|
|
1 |
Sarra Boudjit, Rassim Younes, Mohand Amokrane Bradai, Issam Bouklouche, Lidia Baiamonte & Giuseppe Pintaude Mechanical, Tribological, and Electrochemical Evaluation of NiCrAlMoFe Thermally Sprayed Coatings Subject to Post-treatments https://doi.org/10.1007/s11665-024-09393-8 |
|
2 |
B Behir, A Benslimane, H Mehdaoui, B Mehdi Impact of hematocrit on pulsatile blood flow in stenosed arteries: a computational study in healthy, diabetic, and anemic models Computer Methods in Biomechanics and Biomedical Engineering 1-13, 2024 |
|
3 |
Younes Rassim, L Baiamonte, Idir Abdelhek, Dalibon Eugenia Bradai Mohand Amokrane, tribological and chemical performances of thermally sprayed alumina SAE International Journal of Materials and Manufacturing 2024, |
|
4 |
Abdelhek Idir, Francesco Delloro, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine, Gabriela MargineanComparative Study of Corrosion Performance of LVOF-Sprayed Ni-Based Composite Coatings Produced Using Standard and Reducing Flame Spray Stoichiometry Materials 2024, 17(2), 458; https://doi.org/10.3390/ma17020458 https://www.mdpi.com/1996-1944/17/2/458 |
|
5 |
E Saoudi, R Younes, N Mesrati, M Ouchabane, L Baiamonte, MA Bradai Effect of silicon content on microstructure and mechanical properties of AlSi alloy coating obtained by physical vapour deposition Transactions of the IMF 2024 https://www.tandfonline.com/doi/full/10.1080/00202967.2023.2287309 |
|
6 |
Abdelhek Idir, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine, Lidia Baiamonte, Giuseppe Pintaude, Correlation of Tensile Properties of Arc-Sprayed Coatings and Easy Testing Methods, Coatings, 13, 2023/5/7, 878. |
|
7 |
C Medjane, A Benslimane, N Mesrati, L Hattali Analytical and numerical analysis of solid cylinder made of radially nonuniform material under extension Composites: Mechanics, Computations, Applications: An International Journal, 15 (2), 2024 |
|
2023 |
|
|
1 |
Hassiba Rabouhi , Dominique Eyidi , Youcef Khelfaoui And Abdelkrim Khireddine Microstructural and mechanical characterisation of WC–Co alloys elaborated by liquid phase sintering and hot isostatic pressing: study of WC crystallites size evolution CANADIAN METALLURGICAL QUARTERLY Vol. 62 Issue 1, 2023https://doi.org/10.1080/00084433.2022.2066240 Taylor and Francis. |
|
2 |
Abdallah Sadki, Rassim Younes, Mohand Amokrane Bradai, Nadir Mesrati, , Effect of NiAl Bond Layer on the Wear Resistance of an Austenitic Stainless Steel Coating Obtained by Arc Spray Process SAE International Journal of Materials and Manufacturing, 2023/5/11, 05-16-04-0022. |
|
3 |
Rassim Younes, Youcef Mouadji, Houcine Touati, Mohand Amokrane Bradai, Modeling Temperature of Contact Generated in Coatings of Pure Alumina Ceramic onto Low Carbon Steel Type 1.0060 Obtained by the Thermal Spraying Process,Advanced Materials Research,1178, 2023, 59-71 |
|
4 |
A Khadimallah, I Harbaoui, S Helaili, A Benslimane, H Sharif, Response of rotational parameter in the stagnation point with motile microorganism: Unsteady nanofluid Advances in concrete construction |
|
5 |
A Benslimane, M Methia, R Hammoum Magneto-Elastic Analysis of Functionally Graded Thick-Walled Sphere International Applied Mechanics |
|
6 |
Rassim Younes ,Mohamed Bournane , Abdelhek Idir , Issam Bouklouche, Mohand Amokrane Bradai, Abdelhamid Sadeddine . Influence of the additive iron element on the microstructural behaviour of the aluminium-copper foundry alloy B206. Industrial laboratory Diagnostics of materials 89(9):48-52 |
|
7 |
Bouklouche Issam, Younes Rassim, Idir Abdelhek, Bradai Mohand Amokrane, Saoula Nadia, Dalibon Eugenia The effect of post heat treatment and TiO2 addition on tribological and electrochemical performances of thermally sprayed alumina Canadian Metallurgical Quarterly |
|
8 |
A Benslimane, M Methia, MA Khadimallah, D Hammiche Stress analysis of rotating thick-walled nonhomogeneous sphere under thermomechanical loadings Forces in Mechanics |
|
9 |
Rassim Younes, Jacek Tomków, Abdelhak Idir, Sarra Boudjit, Mohand Amokrane Bradai Mechanical and structural behavior of high-strength low-alloy steel pad welded by underwater wet welding conditions The International Journal of Advanced Manufacturing Technology |
|
10 |
MA Khadimallah, I Harbaoui, S Helaili, A Benslimane, H Sharif, Composite action in connection of single-walled carbon nanotubes: Modeled as Flügge shell theory Computers and Concrete 32 (4), 365 |
|
11 |
M Hussain, MR Ali, A Benslimane, H Sharif, MA Khadimallah, MN Naeem Service ability design of vibrating chiral SWCNTs: Validation and parametric study Computers and Concrete 32 (4), 393 |
|
12 |
H Bechir, A Djema, K Yaya, M Methia On the coupling of rectilinear shear and stretching in a slab made of incompressible elastic neo-Hookean materials: analytic formulation and finite element validation. Meccanica, 58 (8), 1657-1669, 2023 https://doi.org/10.1007/s11012-023-01671-4 |
|
13 |
H Bechir, F Mendil, K Yaya Extension and inflation of a thick-cylindrical tube made of isotropic compressible of Mooney–Rivlin materials: modeling and finite element simulations Acta Mech Vol. 234, pp 5461-5475(2023). https://doi.org/10.1007/s00707-023-03668-2 |
|
14 |
Hammiche, D., Benslimane, A., & Boukerrou, A. Mechanical Properties of PVC |
|
15 |
MA Khadimallah, A Benslimane, I Harbaoui, S Helaili, M Hussain, MR Ali An innovative fraction laws with ring support: Active vibration control of rotating FG cylindrical shell Earthquakes and Structures 24 (4), 237-245, 2023 |
|
16 |
L. Cheffar, A. Benslimane, D. Sadaoui, A. Benchabane K. Bekkour (2023) Pulsatile flow of thixotropic blood in artery under external body acceleration Computer Methods in Biomechanics and Biomedical Engineering, 26:8, (2023) 927-940, https://doi.org/10.1080/10255842.2022.2098677 |
|
17 |
A. Sahi, M. Hamdi, D. Sadaoui, B. Meziani O. Ourrad Effect of MHD mixed convection on a heat-generating element cooling inside a ventilated square cavity filled with Fe3O4–water ferrofluid Numerical Heat Transfer, Part A: Applications, Vol. 84 issue 8 https://doi.org/10.1080/10407782.2022.2163943 |
|
18 |
R. Cherfi, A. Sahi, D. Sadaoui, A. Benslimane Transient mixed convection in a cylindrical cavity with a rotating finned cylinder (2023) Numerical Heat Transfer, Part B: Fundamentals, An International Journal of Computation and Methodology. Vol. 84 issue 4 https://doi.org/10.1080/10407790.2023.2211229 |
|
19 |
L. Cheffar, A. Benslimane, K. Bekkour, D. Sadaoui & A. Benchabane Pulsatile fow of thixotropic blood in artery under external body acceleration and uniform magnetic feld: Biomedical Application Korea-Australia Rheology Journal vol. 35 pp 361-372 (2023) https://doi.org/10.1007/s13367-023-00066-x. © Korean Society of Rheology 2023. Springer |
|
20 |
F. Nezlioui, A. Benslimane, B. Hamtache, A. Sahi, M.S. Lounici, D.Sadaoui Development of a thermodynamic model for supercharged diesel engine performance and combustion characteristics study Taylor & Francis Production: Combustion Science and Technology GCST: GCST 2285407. DOI: 10.1080/00102202.2023.2285407. |
|
21 |
H. Bechir, F. Mendil, Kamel Yaya Extension and inflation of a thick-cylindrical tube made of isotropic compressible of Mooney–Rivlin materials: modeling and finite element simulations. Acta Mech Vol. 234, pp 5461-5475(2023). https://doi.org/10.1007/s00707-023-03668-2 |
|
22 |
A. Koulali, A. Sahi, B. Meziani, D. Sadaoui CFD Analysis of Natural Convection Between Two Superposed Fluids: Role of Corrugated Bottoms Chemical engineering communications, vol. 210, (2023) issue 5: Recent Advances in Heat and Fluid Flow https://doi.org/10.1080/00986445.2021.1976162 |
|
2022 |
|
|
1 |
A. Benslimane, S. Fatmi,L. Taouzinet, D. Hammiche Mathematical modeling of transdermal drug delivery using microneedle Materials Today: Proceedings |
|
2 |
A. Idir, F. Delloro, R. Younes, M. A. Bradai, A. Sad-eddine, A. Benabbas . Microstructure analysis and mechanical characterisation of NiWCrBSi coatings produced by flame spraying. Metallurgical Research & Technology, 119(4), 403 (2022). |
|
3 |
A. Idir, F. Delloro, R. Younes, M. A. Bradai, A. Sad-eddine, A. Benabbas . Microstructure and Tribological Behaviour of NiWCrBSi Coating Produced by Flame Spraying. Physics of Metals and Metallography, 1-9. ISSN 0031-918X, 2022. © Pleiades Publishing, Ltd., (2022). |
|
4 |
R. Younes, M. A. Bradai, A. Sadeddine, Y. Mouadji. Microstructure and Tribological Performance of Thermally Sprayed Molybdenum Coating. Chemistry Africa. https://doi.org/10.1007/s42250-021-00306-z. (2022) |
|
5 |
A Benslimane, M Methia, R Hammoum, MA Khadimallah Analytical and numerical analysis of an internally and/or externally pressurized thick-walled sphere made of radially nonuniform material International Journal on Interactive Design and Manufacturing (IJIDeM) |
|
6 |
A. Benslimane, M. Methia, M. A. Khadimallah Nonlinear stress analysis of rubber-like thick-walled cylinder Journal of Rubber Research25 (4), 245-356, 2022 https://doi.org/10.1007/s42464-022-00180-5 |
|
7 |
A Benslimane Nonlinear stress analysis of rubber-like thick-walled sphere using different constitutive models Materials Today: Proceedings, 53, 46-51, 2022 https://doi.org/10.1016/j.matpr.2021.12.284 |
|
8 |
R Benchallal, A Benslimane, O Bidgoli, D Hammiche Analytical solution for rotating cylindrical FGM vessel subjected to thermomechanical loadings Materials Today: Proceedings, 53, 24-30, 2022 https://doi.org/10.1016/j.matpr.2021.12.212 |
|
9 |
Benslimane, A., Fatmi, S., Taouzinet, L., & Hammiche, D. Mathematical modeling of transdermal drug delivery using microneedle. Materials Today: Proceedings, 53, 213-217, 2022 |
|
10 |
Benslimane, A., Methia, M., Hammoum, R., & Khadimallah, M. A. Analytical and numerical analysis of an internally and/or externally pressurized thick-walled sphere made Of radially nonuniform material. I.J. on interactive Desig ad Manufacturing (IIDeM) 1-12, 2022 https://doi.org/10.1007/s12008-022-00976-0 |
|
2021 |
|
|
1 |
A Benslimane, R Benchallal, S Mammeri, M Methia, M A Khadimallah Investigation of displacements and stresses in thick-walled FGM cylinder subjected to thermo-mechanical loadings International Journal for Computational Methods in Engineering Science and Mechanics 22(2), 138-149. 2021 https://doi.org/10.1080/15502287.2020.1853853 |
|
2 |
A. Idir, F. Delloro, R. Younes, M. A. Bradai, A. Sad-eddine , A. Benabbas Tribological performance of thermally sprayed NiWCrBSi alloy coating by two different oxyacetylene flame stoichiometries. Transactions of the IMF (Transactions of the Institute of Metal Finishing) (2021). https://doi.org/10.1080/00202967.2021.1955525 |
|
3 |
R. Younes, A. Sadeddine, M. A. Bradai, S. Aissat, A. Benabbas. Investigation of the influence of tempering on microstructure and wear properties of high alloy chromium cast iron. Advances in materials science. Vol 21 N.2 (68) Juin 2021 |
|
4 |
5R. Younes, I. Bouklouche, A. Idir, M. A. Bradai. Characterization of a copper deposit obtained by the electrolytic method. Algerian Journal of Materials Chemistry Vol 04 (2021) pp 26- 32. |
|
5 |
Khaled Allem1; El-Bay Bournane2; Youcef Khelfaoui3: A Service-Oriented Cmponent-Based Framwork for dynamic Reconfiguration Modeling Targeting system C/TLM. Hindawi: International Journal of Reconfigurable Computing, Volume 2021, article: ID5584391, 31 pages. https//dio.org/10, 1155/2021/5584391. |
|
6 |
Abdelkader Khamchane ∗1, Youcef Khelfaoui †1 Et Brahim Hamtache ‡1 : Shape Optimization of extended tube muffler using Threshold Acceptance, simulated annealing and FEM methods. Canadian Acoustics / Acoustique canadienne, Vol. 49 No. 2 (2021) – 23. http://jcaa-aca.ca |
|
7 |
Hassiba Rabouhi1*, Youcef Khelfaoui2, Abdelkrim Khireddine1: Characterization and Microstructural Evolution of WC-Co Cemented Carbides. Annales de Chimie -Science des Matériaux , Vol. 45, No. 3, June, 2021, pp. 245-249, http://iieta.org/journals/acsm |
|
8 |
A. Benslimane, C. Medjdoub, M. Methia, M. A. Khadimallah, D. Hammiche Investigation of displacement and stress fields in pressurized thick-walled FGM cylinder under uniform magnetic field Materials Today: Proceedings6, 101-106, 2021 https://doi.org/10.1016/j.matpr.2020.05.462 |
|
9 |
I Harbaoui, MA Khadimallah, A Benslimane, G Jin, Ö Civalek Formulation of continuous element of prestressed stiffened circular cylindrical shell Steel and Composite Structures, 41(4), 521-531. 2021 https://doi.org/10.12989/scs.2021.41.4.521 |
|
10 |
H. Mehdaoui, H. Ait Abderrahmane, F. Nait Bouda 2D numerical simulation of tear film dynamics: Effects of shear-thinning properties European Journal of Mechanics / B Fluids. Vol.90, pp 128-136, 2021, https://doi.org/10.1016/j.euromechflu.2021.09.001 |
|
11 |
M. Amokrane, D. Sadaoui New Designs’ of Turbulence Promoters To Use In Satwater Purification Processes. the First International Conference on Renewable Energy Advanced Technologies and Applications, October 25-27, 2021. Research Unit for Renewable Energies in Saharan Region, Adrar, ICREATA’2021 Chairs. ISBN:978-9931-9819-0-9. Proceeding |
|
12 |
M. Amokrane, D. Sadaoui Undulated insert for boosting desalination efficiency in membrane systems Brazilian Journal of Chemical Engineering, Springer 2021 september, 38: 837-847, Springer. https://doi.org/10.1007/s43153-021-00151-0. |
|
13 |
H. Mehdaoui, H. Ait Abderrahmane, F. Nait Bouda, A. Koulali, S. Hamani 2D numerical simulation of tear film dynamics: Effects of shear-thinning properties European Journal of Mechanics - B/Fluids, Vol 90, Pages 128-136, November–December (2021), Doi: 10.1016/j.euromechflu.2021.09.001. |
|
14 |
M. Amokrane, D. SadaouiImproving the reverse osmosis desalination system with tilted oval spacers in a zigzag configuration. Desalination and Water Treatment Journal, Taylor & Francis, 211 (2021), 359-368 January. https://doi.org/10.5004/dwt.2021.26811 (ISSN 1944-3994 E-ISSN : 1944-3986). |
|
2020 |
|
|
1 |
B. Meziani, D. Sadaoui, M. Adnani, A. Sahi Mixed Convection in Lid-Driven “T” Shallow Cavity Heated From Bottom and Filled by Two Immiscible Fluids of Air and Al2O3-Water Nanofluid 2020, MATEC Web of Conferences vol. 330, EDP Sciences. DOI: 10.1051/matecconf/202033001008 |
|
2 |
S. Sebaihia, Y. Khelfaoui, M. Bououdina, I. Belabbas, Y.Bouhaddad. Dependence of NiTi hydride stability by co-substitution by (Zr,Mg) onto Ti and (Cr,Cu) onto Ni:First-principles study. Philosophical Magazine & Philosophical Magazine Letters (Francis and Taylor), (23 juin 2020). DOI: 10.1080/14786435.2020.1782499 |
|
3 |
Hassiba Rabouhi, Youcef Khelfaoui, Abdelkrim Khireddine: COMPARATIVE STUDY BY IMAGE ANALYSIS OF WC-Co ALLOYS ELABORATED BY LIQUID PHASE SINTERING AND HOT ISOSTATIC (accepté juin 2020) PRESSING. Annales de Chimie - Science des Matériaux |
|
4 |
K. Yaya, H. Bechir, S. Bouzidi Computation of Cauchy heterogeneous stress field in a cruciform specimen subjected to equibiaxial tensile within parameter identification of isotropic hyperelastic materials. Tech. Mech., Vol. 40, Is. 1, (2020), 97–107. http://doi.org/10.24352/UB.OVGU-2020-018 |
|
5 |
R. Younes, M. A. Bradai, A. Sad-eddine, Y. Mouadj. Effect of Bond-Layer on the Wear Resistance of a Martensitic Stainless Steel Coating Obtained by Wire Arc Spray. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials Vol. 30, No. 1, February, (2020) pp. 29-34 |
|
6 |
A. Koulali, B. Meziani, D. Sadaoui, A.Sahi, M. Adnani Numerical investigation of conjugate heat transfer in the presence of two fluids separated by a rigid wall Heat Transfer, Volume. 49, issue 8. 2020 ; 1–21. https://doi.org/10.1002/htj.21863. Online ISSN :2688 – 4542 |
|
7 |
N. Hamici, A..Sahi, D.SadaouiCombined mixed convection and radiation heat transfer in presence of participating medium in a square cavity with an inside heated plate Arabian Journal for Science and Engineering, AJSE, 45, pages7305–7319(2020). https://doi.org/10.1007/s13369-020-04485-8 (ISSN: 2193-567X (Print) e-ISSN: 2191-4281. |
|
2019 |
|
|
1 |
A. Koulali, B. Meziani, D. Sadaoui, M. Adnani Effect of geometrical shape on the natural Convection of two Newtonian fluids in separated cavity SSRN Electronic Journal, ELSEVIER. DOI 10.2139/ssrn.3373169, 2019. : http://dx.doi.org/10.2139/ssrn.3373169 |
|
2 |
I. Bouklouche, R. Younes, A. Idir, M. A. Bradai, A. Sad-eddine, Simulation and Numerical Modeling of Mechanical Properties of Steel Mold X39CrMo17-1. Revue des composites et des Matériaux Avancés, Journal of Composite and Advanced Materials vol 29 No 6, Décembre, (2019) pp. 351-355. |
|
3 |
Ramdane Nora, Touhami Mohamed Zine, Khettache Abdelkader, Khelfaoui Youcef, Ourdjini, Xin Jiang. Boriding and boronitrocarburising effects on hardness,wear and corrosion behavior of AISI 4130 steel. Matéria (Rio J vol. 24 no.1 Rio de Janeiro 2019 Epub May 20, 2019 |
|
4 |
Djamel Amari, Hafit Khireddine, Youcef Khelfaoui, Nadia Saoula : Adhesion and Corrosion of Ti, TiN and TiCrN Films Deposits on AISI 316L in SBF Solution. Defect and Diffusion Forum, https://www.scientific.net/DDF, Septembre 2019 https://doi.org/10.4028/www.scientific.net/DDF.397.39 |
|
5 |
. Idir, R. Younes, Y. Mouadji, A. Sadeddine, M. A. Bradai, Study of wear resistance in dry and lubricated regime of molybdenum coating obtained by thermal spraying.Journal of New Technology and Materials. Volume 08 n°03 (2019) 97-101. |
|
6 |
Boukhalfa Belache, Y.Khelfaoui, Mohamed Bououdina, Tewfik Souier, Waipeng Caie Photoluminescence of ZnS:Cu quantum dots embedded in silica thin films. Journal of Luminecence, Volume 207, March 2019, Pages 258-26. https://doi.org/10.1016. |
|
7 |
A. Koulali, B. Meziani, D. Sadaoui, M. AdnaniEffect of geometrical shape on the natural Convection of two Newtonian fluids in separated cavity SSRN Electronic Journal, ELSEVIER. DOI 10.2139/ssrn.3373169, 2019. : http://dx.doi.org/10.2139/ssrn.3373169 |
|
8 |
N.Akilal, F. Lemaire, N.B. Bercu, S. Sayen, S.C.Gangloff, Y. Khelfaoui, H.Rammal, H. Kerdjoudj. Cowries derived aragonite as raw biomaterials for bone regenerative medicine: Materials Science and Engineering: C,Volume 94, 1 January 2019, Pages 894-900, https://doi.org/10.1016/j.msec.2018.10.039. Impact Factor: 5.080 |
|
9 |
S. Mouloud, F. Nait Bouda, D. Sadaoui, F. Mendil On the Onset of Instabilities in Mixed Convection Boundary Layer Flow Over a Heated Horizontal Circular CylinderJournal of Thermal Science and Engineering Applications, Vol. 11, October 2019 / 051002-1-10. Transaction of the ASME ISSN 1948-5085 e-ISSN 1948-5093. DOI: 10.1115/1.4042586. |
|
10 |
A. Aghbari, H. Ali Agha, D. Sadaoui Soret- dufour effect on mixed convection past a vertical plate in non-darcy porous medium saturated with buongiorno nanofluid in the presence of thermal dispersionJournal of Mechanics, volume 35, Issue 6, pp851-862, 2019. doi:10.1017/jmech.2019.8. ISSN 1727-7191 e-ISSN 1811-8216. |
|
11 |
A. Aghbari, H. Ali Agha, D. Sadaoui Soret- dufour effect on mixed convection past a vertical plate in non-darcy porous medium saturated with buongiorno nanofluid in the presence of thermal dispersion Journal of Mechanics, volume 35, Issue 6, pp851-862, 2019. doi:10.1017/jmech.2019.8. ISSN 1727-7191 e-ISSN 1811-8216. |
|
12 |
A. Benslimane, K. Bekkour, P. François, D. Sadaoui A. Benchabane Carboxymethyl Cellulose: Rheological and Pipe Flow Properties. Recent Advances in Petrochemical Science Vol.5 Issue 5 septembre 2018. RAPSCI.MS.ID.555675 (2018). ISSN: 2575-8578. DOI: 10.19080/RAPSCI.2018.05.555675. |
|
13 |
M. N.Messaoudi, Bouaziz,H. Ali AghaDouble Diffusive Convection in Flow Couple Stress Nanofluid in aPermeable Wall Vertical Channel in the Presence of a Magnetic Field", Nano Hybrids and Composites, Volume 26, (2019)pp 30-44,https://doi.org/10.4028/www.scientific.net/NHC.26.30 |
|
2018 |
|
|
1 |
A. Lalaoua, F. Nait Bouda Numerical investigation of the onset of axisymmetric and wavy Taylor-Couette flows between combinations of cylinders and spherocylinders The European Physical Journal Plus (2018) 133:383. DOI 10.1140/epjp/i2018-12240-6 |
|
2 |
R. Younes, M. A. Bradai, A. Sadeddine, Y. Mouadji and A. Benabbas,Effect of heat treatment on tribological behavior of superalloys Ni-Cr-Al-Mo coatings obtained by thermal spraying.Matériaux & Techniques 106, 605 (2018). https://doi.org/10.1051/mattech/2019003 |
|
3 |
Y. Mouadji, M. A. Bradai, Y. Rassim, A. Sad-eddine, A. Benabbas,Influence of heat treatment on microstructure and tribological behavior of flame spraying Fe-Ni-Al alloy coating.Journal of Central South University. Volume 25 (3) pp 473-481 (2018). |
|
4 |
Boukhalfa Belache, Youcef Khelfaoui, Mohamed Bououdina, Tewfik Souier, Waipeng Cai.Structural and optical properties of silica single-Layer films doped with ZnS quantum dots: Photoluminescence monitoring of annealing-induced defects.Materials Science in Semiconductor Processing,.https://doi.org/1016/j.mssp.2018. 12.013 |
|
5 |
H Bechir, A Benslimane On the propagation of weak shock waves in compressible thermohyperelastic solids Acta Mechanica, 229, 87-97, 2018https://doi.org/10.1007/s00707-017-1961-x |
|
6 |
A Benslimane, S Bouzidi, M MethiaDisplacements and stresses in pressurized thick-walled FGM cylinders: Exact and numerical solutions International journal of pressure vessels and piping Vol 168, 219–224 (2018). https://doi.org/10.1016/j.ijpvp.2018.10.019 |
|
7 |
N. Hamici, A. SAHI,D. Sadaoui, A. Djerrada Numerical Investigation of Combined Surface Radiation and Free Convection in a Square Enclosure With an Inside Finned Heater Fluid Dynamics & Material Processing FDMP, vol.14, no.3, pp.155-175, 2018. FDMP. doi:10.3970/fdmp.2018.01114. ISSN 1555-256X EISSN : 1555-256X |
|
8 |
Hamdi Messaoud, Bachir Meziani, Djamel Sadaoui Numerical study of mixed convection and flow pattern in various across-shape concave enclosures, International journal of Heat and Technology IJHT° Vol. 35, No. 3, September 2017, pp. 567-575. DOI: 10.18280/ijht.350313. ISSN: 0392-8764 |
|
2017 |
|
|
1 |
A. Khamchane, Y. Khalfaoui, B. Hamtache shape optimization of reactive mufflers using Threshold Acceptance and FEM Methods. Canadian Acoustics (2017) Vol. 45 N°2 |
|
2 |
S. Aissat, A. Sad-eddine, M. A. Bradai, R. Younes, A. Bilek, A. Benabbas, Effect of heat treatments on the hardness and wear of grinding balls.Metal Science and Heat Treatment. Volume 59, Issue 5–6, pp 297–301 (2017). |
|
3 |
D. Beicha, T. Kanit, Y. Brunet, A. Imad, A. El Moumen, Y. Khelfaoui. Effective transverse elastic properties of unidirectional fiber reinforced composites.Mechanics of Materials, 102 (2016) 47-53. www.elsevier.com/locate/mechmat. |
|
4 |
F. Ahnia, Y. Khelfaoui, B. Zaid, F.J. Perez, D. Miroud, A. Si Ahmed, G. Alcal. Thermally sprayed Al/Mo coatings on industrial steel E335 and effects on electrochemical parameters in simulated acid rain.Journal of Alloys and Compounds. 696 (2017) 1282 – 1296. http://www.elsevier.com/locate/jalcom. |
|
5 |
Abdelkader Khamchane, Youcef Khelfaoui, Brahim Hamtache. Shape optimization of reactive muflers using threshold acceptanceand FEM methods. Journal of Canadian Acoustics. Vol. 45 N°. 2 (2017)-25 à 35. www.PCB.com/ Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser. . |
|
6 |
A. Sahi, D. Sadaoui, N. Sadoun, A. Djerrada Effects of magnetic field on natural convection heat transfer in a T shaped cavity Mecanics & Industry Vol N° 18, 407 (2017). AFM EDP Sciences 2017, https://doi.org/10.1051/meca/2017014. ISSN: 2257-7777; E-ISSN: 2257-7750 |
|
7 |
O. Abahri, D. Sadaoui, K. Mansouri, A. Mojtabi, M.C. Mojtabi thermogravitational separation in horizontal annular porous cell Mecanics & Industry 18, 106 (2017). AFM EDP Sciences 2015, https://doi.org/10.1051/meca/2015115. ISSN: 2257-7777; E-ISSN: 2257-7750 |
|
8 |
M. Allouche, H. Ait Abderrahmane, S. M. Djouadi, K. MansouriInfluence of curvature on tear film dynamics European Journal of Mechanics / B Fluids 66 (2017) 81–91 |
|
2016 |
|
|
1 |
A. Khamchane, Y. Khalfaoui, B. Hamtache, Shape Optimization of Extended Tube Muffler using Threshold Acceptance. Simulated Annealing and FEM Methods. INTER-NOISEand NOIE-CON Congress and conferene proceedings, InterNoise2016, Hamburg Germany 2016 |
|
2 |
A Benslimane, IM Bahlouli, K Bekkour, D Hammiche Thermal gelation properties of carboxymethyl cellulose and bentonite-carboxymethyl cellulose dispersions: Rheological considerations Applied Clay Science 132, 702-710, 2016 https://doi.org/10.1016/j.clay.2016.08.026 |
|
3 |
A Benslimane, K Bekkour, P François, H Bechir Laminar and turbulent pipe flow of bentonite suspensions Journal of Petroleum Science and Engineering, 139, 5-93, 2016 https://doi.org/10.1016/j.petrol.2015.12.020 |
|
4 |
A. Sadki, R. Younes, M. A. Bradai, M. L. Hattali, N. Mesrati, Microstructure and interfacial strength of stainless steel coatings obtained by thermal spray process. Annales de Chimie Science des Matériaux Vol 40/3-4 (2016) pp.131-142. |
|
5 |
M. Amokrane, D. sadaoui, A ; C. P. Koutsou, M. Dudeck New spacer designs for the performance improvement of the zig-zag spacer configuration in spiral-wound membrane modulesDesalination and Water Treatment Journal, Taylor & Francis (2015) 1-9. http://dx.doi.org/10.1080/19443994.2015.1022003 (ISSN 1944-3994 E-ISSN : 1944-3986). Desalin. Water Treat. 2016, 57, 5266-5274. |
|
6 |
N. Boutalbi, M. Najib Bouaziz , M. Allouche Influence of temperature-dependent absorptivity on solid surface heated by CO2 and Nd:YAG lasers Journal of Laser Applications 28, 032004 (2016) |
|
7 |
D. Sadaoui, A. Sahi, A. Djerrada, K. Mansouri,Coupled radiation and natural convection within an inclined sinusoidal solar collector heated from bellow Mechanics & Industry17, 302 (2016). AFM, EDP Sciences 2016. DOI: 10.1051/meca/2015060. www.mechanics-industry.org |
|
8 |
M. Amokrane, D. Sadaoui temperature effect on the development Of concentration polarization on osmotic Membrane walls for desalination International Journal of Energy, Environment, and Economics vol.24 n°4 2016. ISSN: 1054-853X Nova Science Publishers, Inc. (http://www.novapublishers.org/catalog/product_info.php?products_id=62755) |
|
9 |
A. Sadki, M. L. Hattali, M. A. Bradai , R. Younes , N. Mesrati, Characterization and Modeling of the Mechanical Behavior of Aeronautical Alloy Based Composite. Universal Journal of Chemistry 4(1) (2016) 10-19. |
|
10 |
R. Younes, M. A. Bradai, A. Sadeddine, Y. Mouadji, A. Bilek and A. Benabbas, Effect of TiO2 and ZrO2 reinforcements on properties of Al2O3 coatings fabricated by thermal flame spraying. Transactions of Nonferrous Metals Society of China. Vol 26 n°5 (2016) 1345-1352. |
|
11 |
R. Younes, M. A. Bradai, A. Sadeddine, Y. Mouadji, A. Bilek and A. Benabbas, Structure and mechanical properties of stainless steel coatings deposited by arc wire spraying. Journal of Materials , Processes and Environment. ISSN: 2235-1020 Vol.3 (02) (2015) pp 94-98 http;//www.urmpe.dz/journal/archives. |
|
12 |
R. Younes, M. A. Bradai, A. Sadeddine, Y. Mouadji, A. Bilek and A. Benabbas, Microstructural and Tribological properties of Al2O3-13%TiO2 Thermal Spray Coatings Deposited by Flame Spraying. Metallurgical and materials transactions B. Vol 46 n°5 (2015) 2394-2403. |
|
13 |
N. Bounar, M. A. Bradai, A. Sadeddine, Y. Mouadji, A. Benabbas, Effet des post-traitements sur les propriétés tribologiques d'un dépôt à base de nickel réalisé par projection thermique. Annales de Chimie et Science des Matériaux, vol 38 (5-6) (2013) 241-252 |
|
14 |
A Sadeddine, S. Aissat, M.A. Bradai, A. Benabbas, Influence de la vitesse de refroidissement sur la microstructure et la trempabilité des boules de broyage. Metallurgical Research and Technology 111, 107-117 (2014). |
|
2015 |
|
|
1 |
M. Amokrane, D. sadaoui, C. P. Koutsou, J. Karabelas, M. DudeckA study of flow field and concentration polarization evolution in membrane channels with two-dimensional spacers during water desalinationJournal of Membrane Science (2015), vol. 477, pp. 139-150, http://dx.doi.org/10.1016/ (ISSN : 0376-7388 E-ISSN : 1873-3123) |
|
2 |
D. Sadaoui, A. Sahi, H. Nadjib, B. Meziani, T. Amoura Free convection in a square enclosure with a finned plate Mechanics & Industry, 16, 310 (2015), DOI: 10.1051/meca/2015005 |
|
3 |
F. Mendil, F. Nait Bouda, D. SadaouiEffect of temperature dependent viscosity on the thermal instability of two-dimensional stagnation point flowMechanics & Industry, Vol. 16, N°5 (2015) 506, AFM, EDP Sciences 2014. http://dx.doi.org/10.1051/meca/2015031(ISSN : 2257-7777 E-ISSN : 2257-7750) |
|
4 |
H. Ali Agha, M.N. Bouaziz, S. Hanini Magnetohydrodynamic, thermal radiation and Convective boundary effects of free convection flow Past a vertical plate embedded in a porous medium Saturated with a nanofluid Journal of Mechanics, pp 1-10 (2015). DOI : 10.1017/jmech.2015.28 |
|
5 |
F. Nait Bouda, F. Mendil, D. Sadaoui,K. Mansouri, M. Amaouche Instability of opposing double diffusive convection in 2D boundary layer stagnation point flow Int. J. of Thermal Sciences 98 (2015) 192-201.DOI: 10.1016/j.ijthermalsci.2015.07.014 (ISSN : 1003-2169 E-ISSN:1993-033X) |
|
2014 |
|
|
1 |
A. Sahi, D. Sadaoui, B. Meziani et K. MansouriEffects of thermal boundary conditions, surface radiation and aspect ratio on thermal performance in ‘T’ shallow cavityMechanics & Industry, Vol. 14, Issue 06, January 2014, pp 557-568, AFM, EDP Sciences 2014. DOI: http://dx.doi.org/10.1051/meca/2014079. (ISSN : 2257-7777 E-ISSN : 2257-7750) |
|
2 |
A. Khamchane, Y. Khalfaoui, B. Hamtache Shape optimization of reactive mufflers using threshold acceptance and finite element methods Proceedings of Meetings on Acoustics. Montréal 2013 |
|
3 |
N. Boutalbi Modeling of surface tempering by a pulsed laser beam: Study of the material type’s influence Journal of New Technology and Materials, Volume 4, pp 147, 2014 |
|
2013 |
|
|
1 |
Boukhalfa Belache, Y. Khelfaoui. Influence of temperature on structure and composition of Zinc sulfide nanoparticules dispersed in silica. Ann. Chim. Sci. Mat, 2013, 38(5-6), pp. 223-231. Vol.10 (2012) 1-11 www.sssj.org/ejssnt. |
|
2 |
A Benslimane, P François, K Bekkour Comportement mécanique des boues biologiques en écoulement La Houille Blanche |
|
3 |
M.L. Fares, M. Belaid, O. Chahaoui, H. Ghous and Y. Khelfaoui. An Investigation on the Usefulness and Performance of New Hot Working Tool Steel by Nitrocarburizing Process. Journal of Surface Science and Nanotechnology |
|
4 |
M.A. Bradai, A. Sadeddine, Y. Mouadji, Analyse microstructurale et tribologique de deux types de dépôts en acier inoxydable 18/8 et en molybdène obtenus par projection thermique. Revue de Métallurgie 110, 405–414 (2013). |
|
5 |
Y. Mouadji, M.A. Bradai, A. Bouchoucha, A. Bilek, Numerical Analysis of Heat Exchange in a Dry Friction Contact Between a Pin and a Rotating Cylinder. Journal of materials science and engineering A 3 (6) (2013) 430-436. |